DC Ceiling & Floor Fans 12 volt, 24 volt and 48 volt


		Fan Thernostat These thermostats can switch up to 22 amps at 120 VAC and they work fine for up to 10 amps at 12 or 24 VDC. Use them with DC fans to turn the fans on or off as temperature changes. They mount in a standard 2" x 4" electrical box. The attic fan thermostat has single pole contacts that close (turn fan on) as temperature rises. Its adjustment range is 90ºF to 130ºF. When the thermostat reaches the turn-on temperature, it must fall by 15ºF before it will turn off.

	The heat/cool thermostat has double throw contacts, so it can be used to turn a fan on as the temperature rises or as it falls, depending on how it is wired. Its range is 50ºF to 90ºF and its differential is 2ºF.

SOS Part # 085-08036
Attic Fan Thermostat
Price $35

SOS Parrt # 085-08032
Heating & Cooling Thermostat
Price $35.00

Picture not
available

Fan Speed Controller
If you are using a fan on 12 volts, you can increase
air movement and power consumption with the
085-09169 control, which takes 12 volts input and
steps it up to 24 volts. At 24 volt you can almost
double the air movement.

The 24-volt input control is for use on 24-volt battery
systems only. Maximum 1.5 amps.

SOS Part # 085-09169
Speed Controller 12 volt in
/0~24 Volt out... Price $93.00

SOS Part # 085-09170
Speed Controller 24 volt in
/0~24 Volt out... Price $45.00


SOS Part # 085-07453 12/24 Volt Ceiling Fan Painted White Price $290.00

SOS Part # 085-07456 12/24 Volt Ceiling Fan Price $236.00

12 / 24 Volt 60" Ceiling Fan
blades, designed by the Florida Solar Energy Center in cooperation with a major fan manufacturer, utilize
Gossamer Wind Technology, previously found only in AC powered ceiling fans. In tests conducted by the
Florida Solar Energy Center, the 3-blade showed a 22.8% increase in cubic feet per minute (CFM) over the

Technical Information
Fan weight: 14 lbs. or 6 kg. Shipping weight: 15 lbs. or 7 kg.

Powered by a permanent magnet, TENV motor, with long life brushes.
draws 0.5 amp @12VDC, and 0.78 amps @ 24VDC.

At 12 VDC the 60 RPM, moving 2500 CFM. When mounted at least 8ft above the floor in an open room.
At 24 VDC the 120 RPM, moving 3400 CFM. When mounted at least 8ft above the floor in an open room.

In a close-mount installation the blades are approximately 10 inches from the ceiling; when mounted with the
accompanying down rod the blades will be approximately 24 inches from the ceiling.

These ceilings fans are designed to work either directly with Solar
Panels or power provided by a Battery. 12, 24 or 48 Volt DC operation.

Welcome to SoldonSun.com, We provide clean green & renewable energy products. Solar products are shipped from several distribution
centers in USA. Complete Solar Electric Systems. solar panels, solar charge controllers, batteries, Inverters and many related products,
all available here. 12 volt DC or 120 volt AC LED bulbs & low energy CFL light bulbs are a perfect combination for solar electric systems.
Specialized packages and for commercial and industrial applications, Welcome to SoldonSun.com, We provide clean green & renewable
energy products. Solar products are shipped from several distribution grid-tied or grid independent. LED and solar sign kits special
packages for RV & Marines. Technical support and consultation available. Thank you for visiting SoldOnSun.com Copyright © 1995 ~ 2008
SoldonSun.com, Allmedia Electronics, Inc.

Click the images below to see additional choices

Shipping
calculation
for lower
48 States
only.

If you
reside
these
territories,

Please ask
for the
shipping
Quite.

We Offer better solutions for your
energy needs including solar panels,
solar and LED lights and Solar Batteries.

Improved Solar
Performance, Integrate LED
Lights in Solar applications

Shipping
calculation
for lower
48 States
only.

If you
reside
outside of
these
territories,

Please ask
for the
shipping
Quite.