|
 |
|
MorningStar Charge Controllers
|
|
|
|
|
|
|
SunSaver MPPT 12v/24v Charge
Controller
Morningstar Sunsaver MPPT Charge Controller.
15 amps at 12 or 24 volts. Maximizes energy
harvest with peak efficiency of 97.5%. Allows the
use of high voltage PV modules including thin
films. Converts 36V or 24V solar to 12V battery
charging. May be used as a diversion controller
for wind or microhydro. Specs
|
|
|
|
SunSaver 12 Volt Charge Controller
Sunsaver Charge Controller for battery charging
application. 12 volts 6, 10 and 20 amps. 100%
solid state. Series design (not shunt). True 0 to
100% PWM duty cycle. Setpoint accuracy to 35
mV. Rated for 25% overloads. Fully encapsulated
in epoxy potting. Marine rated terminals / anodized
case. Temperature compensation. Sealed /
Flooded battery select. No need to derate.
Parallel for 40 amps or more. Green charging /
Red LVD indicators. Specs
|
|
SG4 4.5 Amp $29
SS6 6 Amp $40
SS10 10 Amp $48
SS10L 10 Amp LVD $58
SS20L 20 AMP LVD $89
|
|
|
|
|
|
|
|
SunSaver 12 Volt Dual Battery Charge
Controller
Morningstar's SunSaver Duo™ is an advanced
PWM two-battery controller for RV's, caravans,
boats and cottages. Specs
|
|
SS Duo w/Remote Meter
$159
|
|
|
|
|
|
|
ProStar 12 ~ 24 Volt Charge Controller
These are the "Top of the line" in charge
controllers for small systems. The ProStar 15/30
features "intelligent" charge controlling that will
significantly improve battery life and performance.
Settings for sealed or flooded batteries, low
voltage disconnect, temperature compensation
and PWM (pulse width modulation) battery
charging. w/ or w/o LCD For 12V or 24V systems,
rated PV current 15 ~ 30 amps, rated load current
15 ~ 30 amps. Specifications: Battery Vdc (voltage
direct current): 12/24 Solar Amps: 15 ~ 30 A Load
Amps: 15 ~ 30 A Weight: Warranty info: 5 year
limited warranty from manufacturer. Specs
|
|
15 Amp $83.99
15 Amp w/LCD $136
30 Amp $115
30 Amp w/LCD $199
|
|
|
|
|
|
|
|
TriStar Three Function Charge Controller
12V, 24V, 36V, 48V Auto operation
The TriStar Charge Controller 12, 24 or 48 Volt is
a three-function controller that provides reliable
solar battery charging or load control or diversion
regulation. The controller operates in one of these
modes at a time and two or more controllers may
be used to provide multiple functions. The
optional TriStar meter provides system and
controller information. The controller is designed
for both solar home systems and professional
applications. Simple mechanical interface -
knockouts provided, #2 AWG wire lugs,
Compatible with sealed and flooded batteries,
Constant voltage series PWM algorithm,
Accessory digital meter connection via, J-11
phone jack, NEMA 1 indoor closure. Specs
|
|
45 Amp w/o Meter $149
60 Amp w/o Meter $179
|
|
|
|
|
|
|
|
TriStar Meter
The meter will display a great deal of information
about the TriStar controller and the operation of
your system. In addition, the meter enables
manual functions and controller diagnostics.
These capabilities will increase your confidence
that the system is working properly and will help
you to improve system reliability, battery life, and
system performance. It is worth the time getting to
know your meter! Specs
|
|
TS-M-2 Tristar Meter
$102
TS-M2 Tristar Remote Meter
$123
|
|
|
|
|
|
|
|
TriStar MPPT Three Function Charge
Controller 12V, 24V, 36V, 48V Auto operation
Boost - 10% to 30% from your Solar Array.
Morningstar’s TriStar MPPT solar controller with
TrakStar Technology™ is an advanced maximum
power point tracking (MPPT) battery charger for
off-grid photovoltaic (PV) systems up to 3kW. The
controller provides the industry’s highest peak
efficiency of 99% and significantly less power loss
compared to other MPPT controllers. The TriStar
MPPT features a smart tracking algorithm that
maximizes the energy harvest from the PV by
rapidly finding the solar array peak power point
with extremely fast sweeping of the entire I-V
curve. This product is the first PV controller to
include on-board Ethernet for a fully web-enabled
interface and includes up to 200 days of data
logging.. Specs
|
|
45 Amp w/o Meter
$399
60 Amp w/o Meter
$499
|
|
|
|
|
|
|
|
SunLight 12 & 24 Volt Charge Controller
Light Control & Charge control Combo
Sunsaver Charge Controller for battery charging
application. 12 volts 6, 10 and 20 amps. 100%
solid state, All other Specs same as SunSaver.
Specs
Light Control settings from Sunset to Sunrise
- 2 hours ON
- 4 Hours On
- 6 Hours On
- 8 Hourts On
- 10 Hours On
- 3 Hours On then 1 Hour before Sunrise
- 4 Hours On then 2 Hour before Sunrise
- 6 Hours On then 2 Hour before Sunrise
- Dusk to Dawn
|
|
